Each received packet has RSSI values for both antennas as well as the combined value. The radio hardware in the ComProbe 802.11 has two receive chains (one for each antenna). The ComProbe 802.11 uses an Atheros chipset which provides RSSI values in the range of 0 to 128. RSSI is intended to be used in a relative manner, and it shall be a monotonically increasing function of the received power.ĭifferent vendors implement these value in their own way. RSSI shall be measured during the reception of the PLCP preamble. This parameter is a measure by the PHY of the energy observed at the antenna used to receive the current PPDU. RSSI in OFDM PHY: The allowed values for the RSSI parameter are in the range from 0 through RSSI maximum.RSSI indications of up to 8 bits (256 levels) are supported. RSSI in DSSS PHY: The RSSI shall be a measure of the RF energy received by the DSSS PHY.Absolute accuracy of the RSSI reading is not specified. RSSI is intended to be used in a relative manner. RSSI shall be measured between the beginning of the SFD and the end of the PLCP HEC. RSSI in FHSS PHY: The RSSI is an optional parameter that has a value of 0 through RSSI Max.Here are the definitions from the specification. The 802.11 specification does not provide a relationship between the RSSI value and the actual power value.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |